Publication Beamlines Strategic Pillar
(2021). Sixty‐Seventh Annual Scientific Meeting of Canadian Organization of Medical Physicists. Medical Physics 48(8) , 4666-4666. 10.1002/mp.15102. BMIT-ID Materials
(2020). Scientific Abstracts and Sessions. Medical Physics 47(6) , E702-E702. 10.1002/mp.14316. BMIT-ID Materials
24. Rafiuddin; Mohamed Ruwaid (2018). A Structural and Spectroscopic Investigation of Hydrous and Anhydrous Rare-Earth Phosphates. Supervisor: Grosvenor, Andrew Paul. SK: University of Saskatchewan. http://hdl.handle.net/10388/8350. CLS-APS Materials
Abdelrasoul, Amira (2021). Investigation on Hemodialysis Membranes Morphology and Human Serum Proteins Depositions Using Synchrotron-based Imaging. . 10.11159/icbes21.117. BMIT-ID Materials
Abdelrasoul, Amira; Doan, Huu; Lohi, Ali; Zhu, Ning (2021). Synchrotron based Micro Tomography (SR-μCT), Experimental, and Computational Studies to Investigate the Influences of Cross Flow Air Injection in Ultrafiltration Process. Journal of Environmental Chemical Engineering 9(1) , 104611. 10.1016/j.jece.2020.104611. BMIT-ID Materials
Abdelrasoul, Amira; Zhu, Ning; Doan, Huu; Shoker, Ahmed (2023). In-situ synchrotron quantitative analysis of competitive adsorption tendency of human serum proteins on polyether sulfone clinical hemodialysis membrane. Scientific Reports 13(1) , 1692. 10.1038/s41598-023-27596-2. BMIT-BM Materials
Abdinejad, Maryam; Farzi, Amirhossein; Möller-Gulland, Robin; Mulder, Fokko; Liu, Chengyu et al. (2023). Eliminating redox-mediated electron transfer mechanisms on molecular catalysts enables CO2 conversion to ethanol. Patent Number: 10.21203/rs.3.rs-2986898/v1. SXRMB Materials
Abedi, Ali; Cheng, He; Dalai, Ajay K. (2018). Effects of Natural Additives on the Properties of Sawdust Fuel Pellets. Energy & Fuels 32(2) , 1863-1873. 10.1021/acs.energyfuels.7b03663. BMIT-BM Materials
Abed, Jehad; Ahmadi, Shideh; Laverdure, Laura; Abdellah, Ahmed; O'Brien, Colin et al. (2020). Cryomilled Ni-Co-Se Enables Water Oxidation Electrocatalysts Durable at High Current Densities. Patent Number: 10.21203/rs.3.rs-85446/v1. CLS-APS Materials
Abed, Jehad; Heras-Domingo, Javier; Luo, Mingchuan; Sanspeur, Rohan; Alnoush, Wajdi et al. (2023). Multi-Descriptor Design of Ruthenium Catalysts for Durable Acidic Water Oxidation. Patent Number: 10.21203/rs.3.rs-2410178/v1. CLS-APS Materials
Abraham, Akhil Mammoottil; Thiel, Karsten; Shakouri, Mohsen; Xiao, Qunfeng; Paterson, Alisa et al. (2022). Ultrahigh Sulfur Loading Tolerant Cathode Architecture with Extended Cycle Life for High Energy Density Lithium–Sulfur Batteries. Advanced Energy Materials 12(34) , 2201494. 10.1002/aenm.202201494. SXRMB Materials
Achenbach, S.; Hengsbach, S.; Schulz, J.; Mohr, J. (2018). Optimization of laser writer-based UV lithography with high magnification optics to pattern X-ray lithography mask templates. Microsystem Technologies 25(8) . 10.1007/s00542-018-4161-2. SYLMAND Materials
Achenbach, Sven; Wells, Garth; Jacobs, Michael; Moazed, Banafsheh; Iyer, Swathi et al. (2018). Polymer-based X-ray masks patterned by direct laser writing. Review of Scientific Instruments 89(11) , 115001. 10.1063/1.5041916. SYLMAND Materials
Adair, Keegan R (2021). The Design and Characterization of Advanced Li Metal Anodes for Next-Generation Batteries. The University of Western Ontario (Canada). https://ir.lib.uwo.ca/etd/8037/. CLS-APS Materials
Adair, Keegan R.; Banis, Mohammad Norouzi; Zhao, Yang; Bond, Toby; Li, Ruying et al. (2020). Temperature‐Dependent Chemical and Physical Microstructure of Li Metal Anodes Revealed through Synchrotron‐Based Imaging Techniques. Advanced Materials 32(32) , 2002550. 10.1002/adma.202002550. BMIT, SGM Materials